Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 15 Next »

The HPC cluster has been updated, from Talapas to Talapas2

Pronounced tah-lah-paas

Newer hardware, operating system, and infrastructure.

Notable updates

  • Operating system - Red Hat Enterprise Linux 8 (RHEL8)

  • Kernel - 4.18

  • Processors - 3rd generation Intel (Ice Lake) and AMD (Milan)

  • GPUs - Nvidia Ampere A100s

  • Memory - DDR4 3200MT/s and Intel Optane memory in the memory partitions

  • Storage - 250GB home directories

Login

Duckids

Talapas uses UO Identity Access Management system, Microsoft Active Directory, for authentication which requires all users to have a valid UO Duckid.

Links are provided below for external collaborators, graduating researchers, or automation accounts to continue their access to the cluster.

Talapas VPN

A virtual private network (VPN) connection is recommended to access the cluster. This adds an extra layer of security.

Instructions here: Article - Getting Started with UO VPN (uoregon.edu)

We have a Talapas profile in UO VPN which should provide all the same capabilities as UO VPN as well as adding access to Talapas.

Use “uovpn.uoregon.edu/talapas" as the connection URL and your duckid and password.

Do not repeatedly attempt to log in when you’re getting error messages. As with other uses of your DuckID at UO, if you generate a large number of login failures, all DuckID access (including things like e-mail) will be locked University-wide. Similarly, be aware of automated processes like cron jobs that might trigger this situation without your notice.

Once you’re on the VPN, you can access any one of the cluster login nodes:

  • login1.talapas.uoregon.edu

  • login2.talapas.uoregon.edu

  • login3.talapas.uoregon.edu

  • login4.talapas.uoregon.edu

Load balancer

If you can’t use the OU VPN, you can also connect to the login load balancer at login.talapas.uoregon.edu

A load balancer is used to redirect SSH connections to different login nodes to spread the load. The load balancers choice of login node is “sticky” in that repeated connections from your IP address will go to the same login node - as long as there has been some activity within the last 24 hours.

Slurm

List of shared partitions

compute
computelong
gpu
gpulong
interactive
interactivegpu
memory
memorylong

Job control

  • A slurm account is still required for each job, use --account=<your-PIRG>

  • There is no default partition, you must a specify partition(s) with --partition

  • The default memory per CPU is 4GB; use the --mem=<size> or --mem-per-cpu or --mem-per-gpu to adjust as needed

Slurm features

Each node in the cluster has at a minimum processor make, generation, and model Slurm feature tags. For example,

n0173 amd,milan,7713

Nodes with GPUs include Slurm feature tags with GPU model and GPU memory size. For example,

n0172 amd,milan,7413,a100,gpu-40gb

Nodes with large memory include Slurm feature tags with memory size. For example,

n0142 intel,icelake,6348,mem-4tb

Request a node based on processor

Nodes with AMD and Intel processors are available on Talapas2.

Constrain a job to allocate a node with legacy Intel broadwell processor,

#SBATCH --constraint=intel,broadwell

Request a node based on GPU feature

Nodes with 10GB, 40GB, 80GB GPU memory are available on Talapas2.

Constrain a job to allocate a node with 10GB of GPU memory,

#SBATCH --gpus=1
#SBATCH --constraint=gpu-10gb
CUDA A100 MIG slicing

Due to limitations with CUDA MIG slicing, it appears that a job can only use one slice (GPU) per host. That means one GPU per job unless MPI is being used to orchestrate GPU usage on multiple hosts. See NVIDIA Multi-Instance GPU User Guide :: NVIDIA Tesla Documentation. On nodes which have 80GB GPUs MIG mode is not enabled. Request these nodes using, --constraint=gpu-80gb,no-mig

Request node based on memory feature

Nodes with 1TB, 2TB, 4TB memory are available on Talapas2.

Constrain a job to allocate a node with 1TB of memory,

#SBATCH --constraint=mem-1tb

For the complete list of features run,

/packages/racs/bin/slurm-show-features

Processor architectures

Talapas2 is comprised of nodes from multiple separate purchases over the course of several years. Therefore, it has several generations of processors from multiple (Intel and AMD) vendors.

Here is the current architecture layout (this is subject to change):

compute: AMD Milan and Intel Broadwell
gpu: AMD Milan
interactive: Intel Broadwell and IceLake
interactivegpu: AMD Milan
memory: Intel IceLake and Intel Broadwell
login: Intel Broadwell
preempt: All

Storage

/home

/home/<user>: store your data here. Your home directory now has 250GB quota.

/projects

/projects/<pirg>/<user>: store your PIRG specific work files here.

/projects/<pirg>/shared: store PIRG collaboration data here.

Software

Some existing software will run fine on the new cluster.

But, with the operating system update to RHEL8 there will likely be cases where software requires rebuilding.

Generally, issues would be due to differences with the new shared libraries in RHEL8. If you compile software in a way that specifically assumes one architecture (i.e. Intel IceLake) it might not run on all nodes.

LMOD

We’ll provide all software centrally available, including conda environments, through LMOD. 

module load software/version

Conda

Talapas2 uses miniconda-t2 and new conda environments will be built with this base environment. If you have personal conda environments, you might need/want to recreate them using miniconda-t2. Note that using existing Conda environments on either cluster should work fine - it’s making changes that might cause problems.

Spack

Talapas2 uses spack-rhel8 and software provided centrally by this platform will built using this instance with gcc 13.1.0 on Intel Broadwell nodes. 

spack install <package>@version %gcc@13.1.0 arch=linux-rhel8-broadwell

Open OnDemand

Updated Open OnDemand is on Talapas2. Use Google Chrome or Firefox and navigate to,

https://ondemand.talapas.uoregon.edu/

Use your DuckID to log in.

Buttons in the drop down menu within the Talapas desktop may point to previous versions of software.

Ensure you load the most current Talapas2 compatible version by opening a Mate Terminal, then enter module load <software/version>

Globus

Recently deployed Talapas2 Globus endpoint, University of Oregon - Talapas2 Overview | Globus

Technical Differences

These probably won’t affect you, but they are visible differences that you might notice.

  • Talapas2 domain name is talapas.uoregon.edu

  • Hostnames now use the long form, login1.talapas.uoregon.edu

  • Use the long form of hostnames to access other campus hosts, some-other-host.uoregon.edu.

  • Linux User IDs (UID) centrally managed in Active Directory (AD)

  • Linux groups IDs (GID) are centrally managed in Active Directory (AD). And the group names are longer, for example, is.racs.pirg.racs instead of just racs

  • No labels